Will New Brake Rotors Make Noise?

If you’re wondering if your rotors are making noise, read this article first! The cause of brake noise can vary widely, but some common culprits are: Warped or cracked rotors, Poor-quality brake pads, Wet rotors, and Dust. Read on to discover the best way to fix your noise-making rotors. You may be surprised to learn that you’ve already replaced a significant number of parts in your car!

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Warped or cracked rotors

You may have heard this warning sound from your brakes. Warped rotors can cause your car to shake while driving. You can also notice pulsating noises while braking. This noise may be coming from the front or rear rotors. You can also feel pulsation in the steering wheel. Then, you should check if there are any cracks or warping on the rotor’s outer surface.

In addition to making noise while driving, warped rotors will also cause your car to shake or vibrate when braking. If you experience any of these signs, you may need to have your car’s brakes repaired or replaced. Warped or cracked rotors also make your brake pedal vibrate and make chattering noises. If you hear any of these noises, it is likely that your rotors are warped or cracked.

Poor-quality brake pads

When you change your brake pads, you have to be careful not to drive too fast or too slowly. If the new pads are not properly seated, they will make noise and make your brakes work less efficiently. You should drive slowly in an empty parking lot to break-in the new pads. Avoid driving a car with a heavy load or climbing a mountain until you’ve had a chance to test the new brakes.

A grinding noise when new rotors are installed indicates that the brake pad is not properly seated. The pad may have worn to the point where it is rubbing against the rotor, causing the caliper and rotor to contact each other. A squeaking noise is a sign that the brake pads are low-quality and don’t match the surface of the rotor properly. This noise may be caused by a metal flake in the brake pad bond.

READ ALSO :   Does Rotating Tires Reduce Road Noise?

Wet rotors

Wet rotors make noise when the brake pads contact the braking surface, which is a sign of brake pad wear. A worn pad will add force to the braking process, which causes sticky brakes. This problem can occur even at low speeds, when the temperature of the brake pads is higher than normal. It is normal for a car to accumulate a small amount of rust on its rotor surface after a few days of parking. However, this rust quickly wears off when the brake pad applies pressure at high speeds, but can last longer at low speeds.

Squeaky brakes are another sign of wet rotors. The rotor becomes wet after raining and collects small amounts of water, which causes the pads to squeak. The squeaking noise will usually disappear once the car has been driven for a few miles. If the noise persists, the problem may be more serious. It is not practical to avoid driving in puddles if you want to prevent brake noise, but you should try to avoid it as much as possible.

Dust

New brakes will often squeak at low speeds and without any pedal pressure. If the noise persists, the rotor is likely damaged and needs to be replaced or resurfaced. It can also be a sign that the brake pads are wearing unevenly. In either case, brake repair should be performed by a mechanic. A car with dirty brake parts is prone to excessive dust buildup and brake noise.

The dust can come from a variety of sources. In some cases, the mechanic may have bended the backing plate, which is what makes the noise. It may also be due to rust or a pebble stuck between the rotor and backing plate. It’s best to take your car to the mechanic who performed the work to check for these problems. However, if the noise persists, a different issue is likely.

READ ALSO :   Is the Hyundai Kona Noisy?

Dirt

The reason why your brakes are making noise is probably due to rust or dirty rotors. It is also likely that the dust shields on your rotors are bent or dirty. Dirt can also make a new rotor make noise. You can fix this issue by following a few simple steps. If you have new rotors and are still experiencing noise from your brakes, dirt will be the culprit.

First, clean the braking system thoroughly. You should regularly wash your car to reduce dirt, dust, and other debris that might be lodged in the brake system. Aside from scrubbing your car, make sure that you wash your rotors as frequently as possible. Often, dirt and rusty debris can make new rotors and pads squeal. Keeping your braking system clean will prevent the noise from occurring.

Old Man Winter

Brake noise can be annoying and expensive, but it’s not always the result of faulty rotors. In fact, some noises are caused by Old Man Winter, too, which can cause your brakes to perform poorly. However, if you’re not sure whether the noise is permanent or not, read on to find out whether your new rotors are making any noise at all.