Why Your Geyser Makes Noise

If you’re wondering why your geyser is making such a noisy noise, you’re not alone. The noises your geyser makes are actually a natural part of the appliance. In fact, they can actually mean that mineral deposits are building up in the appliance. These deposits can lead to overheating and can even damage the heating element. In order to remove these noises, you can flush your geyser.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Temperature and pressure relief valve

Your geyser’s sizzling noise is most likely a result of a damaged pressure relief valve or the temperature and flow control valve. When these are malfunctioning, the water in the storage tank is forced to escape. A sizzling noise is a warning sign that it is time to contact a plumber. Also, the water in the tank is not at the right temperature.

The temperature and pressure relief valve (TPR) valve is a safety feature on water heaters. This valve is located on the top or side of the tank and releases excess pressure from the water. This pressure relief valve is usually attached to a discharge pipe which diverts hot water away from the heater. The valve should be checked if the sound persists. When the valve is functioning properly, the water heater will stop making noise and causing damage.

If your geyser keeps making noise, you should check the pressure relief valve. A faulty pressure relief valve can result in a leak or stay on. Sometimes, sediment builds up on the valve and can cause it to malfunction. If you suspect the valve has a malfunctioning T&P valve, you should replace it immediately. If it is not, you may need to clean sediment from the relief valve and try it again.

The pressure relief valve is a vital safety feature on water heaters. It is a valve with a tube attached that opens and closes to release pressure when the water pressure reaches its normal operating limits. This limit is usually 150 psi. If the water pressure rises above this limit, the T&P valve should shut the water off. Otherwise, the geyser may explode.

Heating element

If you are experiencing a humming noise coming from your electric water heater, the likely culprit is the heating element. You can easily determine whether the problem is due to a loose heating element by turning off the water and making sure no one is using it to run hot water. If you are experiencing this noise, you may want to try tightening the element or rotating it to solve the issue. The following are common causes and fixes for the noise coming from your electric water heater.

First, check for a leak. The sound may be due to a water leak that’s dripping onto the heating element. A leaking element will make a sizzling sound and may also leak onto the floor. Either way, you need to fix the leak as soon as possible, as a leaking water heater can cause the noise. If you find that the problem is due to the heating element, you may have to replace it.

Pilot light

If your geyser is making noise, you need to know what’s causing it. It could be a faulty heating element inside, the pilot light is out, or your thermostat has malfunctioned. Fortunately, these issues are usually easily remedied with some basic maintenance. In this article, we’ll discuss how to fix a noisy geyser. Ultimately, you won’t have to replace the entire unit.

The first step to relight the pilot light is to turn on the water heater’s power source. The pilot light will make noise if it is not properly lit. If you can’t turn off the power source, you can try to turn the ignition off and on again. But make sure that you don’t leave the pilot light on for too long or you might accidentally turn it off, which could damage your property.


If your geyser makes a loud noise, chances are it’s corroded. A loose valve can cause water to leak from the geyser. When this happens, excess pressure in the geyser’s water tank can cause a crack. Another sign of a corroded or loose valve is water dripping from a temperature-pressure relief valve. It may be time to replace the valve.

While corrosion can happen naturally in geysers, it’s not good for your plumbing. Corrosion occurs when metal converts to oxide, which then becomes thin and corrosive. As this rust builds up inside your pipes, water will continue to attract and attach itself to the rust. The buildup of rust will eventually appear like the picture to the right. It can also lead to pinhole cracks and pipe breakage.

Broken off chunks of sediment swirling around inside the tank

The sound you hear in your geyser is actually a rumbling noise, created by broken off chunks of sediment that are swirling inside the geyser tank. This sediment is not as fine as sand, so it tends to stick together and explode when it heats up. If you think that your geyser is making this noise, it may be time to change the element. To replace the element, simply connect the hose to a drain valve or drain outlet. The water in the tank will be hot when it comes out, but it is worth the effort.

The sound you hear can also be caused by a buildup of sediment. As the sediment builds up, it can cause the heating elements to work harder. The sediment can also cause the geyser to make noise when it boils. To fix this problem, drain the sediment, which is a relatively simple procedure. If this noise is not caused by sediment buildup, consult a plumber.