Why is My Apple Music Not Loud?

If you’re wondering why your music isn’t loud, the most likely culprit is your iPhone’s volume setting. You can adjust your volume by swiping to the right or tapping on the volume arrow at the top of the screen. Once you’ve made these adjustments, re-open the music app and check if the problem has been resolved. If it still doesn’t sound loud enough, try enabling the “Sound Check” feature, which detects naturally low volume levels and dynamically compensates for them.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.


There are a couple of ways to fix this issue. First, you should disable the mono audio feature. Next, you should make sure that the left and right earbuds are set to equal volume. Then, try updating the device’s settings. Alternatively, resetting your AirPods may solve the issue.

Sometimes, the audio quality of AirPods may suffer because the device’s volume control settings are set too low. To fix this issue, you can disable or enable the volume control on your iPhone. You can also try to move the slider to the center position. In case the audio balance is still not satisfactory, you can try to reset your AirPods by pressing the reset button on the back. After the device is reset, the white or amber color will flash.

Another way to fix this issue is to try changing your Bluetooth connection settings. Bluetooth connections are heavily relied on by AirPods. If the settings are corrupted, the best way to fix this problem is to re-establish the connection profile. To do this, open the Settings application on your iPhone and AirPods. After about 30 seconds, open the charging case and hold the Setup button.

Headphone jack

Your iPhone might not have a loud enough volume when you turn the volume up. This can be caused by various problems. For example, your headphones may not work with your phone’s headphone jack. Another reason is that you might have dirt in the charging port. Dirt may prevent the iPhone from recognizing the headphones as being connected, which means that it will try to route music through another speaker instead. To resolve this issue, you can clean the port.

If the headphone jack is clogged with lint, you may be able to remove it by blowing into the port. If this fails, try using a cotton swab soaked in rubbing alcohol. You can then gently move the swab around the speaker recesses.

If your headphones are not loud enough, you may want to check your device’s volume setting. Turning the volume up will enable your headphones to play. If the volume is too low, you may have lint or debris in the jack. Clean it with an anti-static brush, which you can purchase from Amazon.


If you’re having trouble hearing your music, it might be time to check your Apple Music volume settings. If it’s too low or too high, there are a few simple fixes you can try. One of the most common causes of low Apple Music volume is a poor wireless connection. Try disconnecting and reconnecting your headphones to fix the problem. Other fixes include adjusting the EQ settings or rebooting your device.

Depending on your device, Apple Music will play different songs at different volumes. You might want to change the volume of your headphones or set the volume on your iPhone or iPad to a higher level. You can change the volume on your Apple Music in Settings > Music. Alternatively, you can also use a wired pair of headphones.

EQ setting

If you find that your Apple Music is not loud enough, you may want to tweak the EQ setting. This feature is available in the Music app in Settings. However, it isn’t easily accessible. You must look for it in the menus of the Music app, and then tap on Sound Check. It may make higher volume tracks sound lower, so you need to turn it off.

The EQ setting is located under Settings > Music > EQ. This is right below the Sound Check option. You’ll find 23 preset equalizer settings. Each one uses different combinations of treble, midrange, and bass adjustments. You can even assign a different EQ setting per song.

In Apple Music, you can also use the EQ setting to boost the volume. First, make sure that the headphones are in paired mode. Secondly, you’ll need to turn on your Apple Music app. Once you’ve connected your headphones, you’ll be able to hear the music much better.