Why Are NZXT Fans So Loud?

NZXT fans aren’t always quiet, which can be an issue for some users. However, there are a few things you can do to keep the noise level down. First, you can configure the NZXT software to run in silent mode and turn off LEDs and fans when your computer is off. Second, you can disable performance mode, which is overkill for everyday use, and tune the cooling system to lower fan RPMs. This way, your temps stay great even though your fans aren’t running at full capacity.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

NZXT H7 Elite

Some of the NZXT H7 Elite’s features include larger 140mm fans and more pre-installed fans. The case also features a CAM compatible fan controller and RGB illumination on the front fans. However, there’s a downside. The fans can be noisy and can be annoying for some users.

Although the H7 Elite features four 140mm fans, the cooling performance isn’t great. Despite the fact that the H7 Elite has four 140mm fans, it can’t match the NZXT H7 Flow, which has two 120mm fans. It is also restricted by its front panels, which limit airflow.

If you don’t mind noise, you may want to consider buying a different case. The H7 Elite supports most consumer-sized motherboards, from Mini-ITX to EATX. It also supports up to six 2.5-inch hard drives. Its front and rear panels feature holes for routing cables, while the top and side panels have room for a 360mm radiator.

READ ALSO :   Why Can't I Read Out Loud?

NZXT H7 Flow

The H7 Flow comes with a full ATX power supply mount, seven expansion slots, and a 140mm exhaust fan. However, the front and top radiator clearances are only 60mm and 30mm, respectively. Additionally, the H7 Flow lacks a vertical-mount graphics card kit and a slot separator. The H7 Flow’s interior is surprisingly spacious and offers plenty of ports. For example, it supports two USB 3.2 Gen1 and Type-C ports, one HD audio jack, and two USB 3 Gen1 ports. The H7 Flow can support up to three 120mm and three 140mm fans. It can also hold a single 140mm/120mm fan on the rear, but has no front-panel ports.

The H7 Flow is a mid-tower ATX case. It’s based on NZXT’s original H510 Flow, which was a decent case but lacked proper radiator support. It has ample radiator support at the top and a tempered glass side panel. In addition, the front panel is perforated, allowing super airflow to the entire interior.

NZXT Kraken X62

When buying a CPU cooler, noise level is an important consideration. A noisy cooler can have a negative impact on general hardware. However, the noise level of the Kraken X62 is relatively low. This makes it an excellent choice for users demanding more power.

The Kraken X61 pump has a 37dB noise level, which is acceptable for a modern CPU. The pump is also sturdy but can make a rattling sound after prolonged use. However, it can be useful for budget users who want a good cooling solution but do not want to spend a lot of money.

NZXT Kraken X73

The NZXT Kraken X73 RGB is an excellent midrange liquid cooling solution. It has a 360mm radiator, three 120mm fans, and an RGB lighting kit. Unfortunately, this liquid cooler doesn’t offer any software control of fan speeds, and the fans have to be wired to the motherboard. Although the company provides a splitter cable, you’ll need a spare fan header in order to use the fans.

READ ALSO :   Why is VTEC Loud?

NZXT Kraken X72

If you’re an overclocker or use your PC for multi-threaded applications, the NZXT Kraken X72 cooler is just right for you. It comes with a five-year warranty, is smaller than most liquid coolers, and is quieter than most competitors’ offerings. However, it has a few drawbacks. While the fans aren’t particularly loud, they can be very noisy when they’re at full load.

If noise is your issue, you can use the NZXT software to customize the fans’ operation. You can set them to run silently, turn off LED lights, or set a performance mode. This option will lower the fan RPM, which will help keep your computer quiet while keeping temperatures perfect.