Reasons Why Bass Is Loud

There are several reasons why bass is loud. First of all, apartment size can affect the loudness. Big apartments have plenty of spaces to play bass without disturbing the neighbors, while studio apartments are limited in space. For this reason, bass is usually louder than the other instruments in the band. The best solution to this problem is to reduce the volume of the bass. It should not be more than 20 decibels. It is also important to know how to avoid resonating with the neighbors.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Science on loudness curves

Equal loudness curves are used to measure how loud a sound is and how far it is from the listener. Fletcher and Munson studied loudness perception and the equal loudness curve. Later, Robinson and Dadson refined the concept. Today, these curves are commonly referred to as the Fletcher-Munson curve. They are the basis of the Loudness Button that appears on many consumer audio systems.

The difference in the Loudness curve between the high and low frequencies is about 60 decibels. People can hear sounds from 20 Hz to 200 kHz. However, the low end of the chart shows a 60 dB loss in sensitivity. The curves are nearly parallel with each other.

Acoustics of a room

The acoustics of a room determine how loud bass is. A room’s bass frequency response may be flat, distorted, or resonant. The exact frequency response depends on the room’s size, shape, and construction. Acoustic measurements are sometimes misleading, however, since they are often based on incorrect assumptions and ranges of frequencies. Experience is critical in the analysis of acoustic measurements.

The acoustics of a room are just as important as the equipment used to reproduce the music. In fact, some audio experts would argue that room acoustics are more important than audio equipment.


Distortion is a common cause of loud bass. It occurs when audio signals are delivered at higher frequencies than their original level. This distortion can be induced by multiple processes. For this reason, it is essential to understand the signal path. Using headphones can be an excellent way to identify this type of distortion.

Distortion is a natural part of the sound, but it can also cause problems in your mix. It can be a symptom of a faulty power supply, which is one of the most common causes of distorted sound. It can also be caused by a cheap amp. In these cases, replacing your amp should be your last resort. Often, music techs will be able to repair your amp free of charge. Additionally, if you bought it from a store, it’s possible that you’re still covered under your warranty.

Distortion and saturation

Distortion and saturation can transform the sound of a bass guitar. These effects can add character and warmth to the digital signal, and they can shape extreme frequencies into essential mix tools. More producers are finding ways to use these effects in their music. One producer recently discussed A/B testing of his Rat 2 guitar pedal.

Distortion is a result of a digital audio signal being subjected to a linear process of overdriving analog circuitry. It produces warm harmonics similar to saturation, but also results in more breakup. It is usually used in guitar and bass guitar recordings. A variety of plug-ins are available for creating overdrive. For example, the Waves GTR plug-in provides authentic tube distortion for your DAW.

Stack amps

Stack amps for bass are often used to add extra volume to the instrument. They first became popular during the 1960s and 1970s as hard rock evolved. They consisted of multiple cabinet speaker stacks that were driven by powerful amp heads. Marshall, an English company, produced some of the first stacks.

The Who helped popularize the stack amps by using them on stage. They had a unique stage act that had audiences begging for more volume, and they used these amps to achieve that. John Entwistle and Pete Townshend would pile speaker cabinets onstage. They eventually approached Marshall about building a 100-watt amp for the band.

Computer plugins

Computer plugins can make bass sounds louder than they should be. According to a six-month study conducted at Harvard School of Auditory Technodynamics, loud bass can damage components of your computer. Dropped bits and connections are common signs, as is increased susceptibility to viruses. In addition, loud bass can make your music sound worse than it should be, even at a low volume.

Desktop monitors

The presence of noise in a playback stream has long been a tricky problem. Monitors that draw 70 W may have a 70W transformer, but a monitor that draws 120 W should have a 120W transformer. This will protect the transformer from any variation in power supply power. If you suspect that your desktop monitor is too loud, you can do some basic troubleshooting steps.

Firstly, check the audio output ports on the monitor. Most of them feature 3.5mm stereo outs. This can be connected to the audio output ports on your motherboard or to external audio devices. Make sure you use the right audio cable for your monitor (HDMI or DisplayPort) to ensure proper sound output.