Is Polycarbonate Roofing Noisy?

Are you wondering whether polycarbonate roofing is noisy? Read on to learn more about Quietguard, Thermotec roof panels, and other ways to reduce noise. Then, compare the two types of roofing. There are advantages and disadvantages to both. Listed below are some common reasons why polycarbonate roofing is noisy, and some tips for homeowners who are considering polycarbonate roofing. In addition, read our PVC vs polycarbonate roofing article for more information.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Quietguard reduces noise on polycarbonate roofs

There are a number of methods to reduce noise from rain on polycarbonate roofs, but elastomeric sheet insulation is perhaps the most effective. Injecting or compression-moulding silicone sheets on top of the roof can reduce noise by as much as 90 percent. A North Wales-based company developed Quietguard to do just that. The sheets are compatible with almost any polycarbonate roof and can be applied to the entire surface of the roof.

Acoustic foam inside the guards can also be used to reduce noise. Various materials are available for testing their ability to reduce noise. Acoustic testing can be done on different materials to find out which one provides the best noise reduction. Damping is a method that reduces noise by absorbing vibration. This damping material can also be used to reinforce the soundproofing of the guard.

Anti-noise tape

Often, roofs made of polycarbonate are prone to creaking. This is the result of changes in temperature. But there are solutions. One such solution is “Anti-noise tape for polycarbonate roofing.” Applied to polycarbonate roofs, this tape prevents creaking. In addition to the noise-absorbing qualities of the tape, it can also prevent leaks at the walls.

Polycarbonate roofs can be produced using minimal supporting structures. They offer superior thermal, UV-reduction, and shading properties. Polycarbonate is also certified under Australian Standards (AUS standard 1170.2). Unlike glass, polycarbonate is impact-resistant and has excellent fire resistance. Its impact strength is 250 times greater than glass. No wonder it’s the best choice for high-wind areas.

Thermotec roof panels

There are a few pros and cons of Thermotec roof panels. The biggest one is the cost. Compared to other refurbishment options, Thermotec panels are incredibly affordable. They’re also very simple to install – a typical installation will only take one day! A great thing about Thermotec roof panels is that they provide instant benefits for your conservatory – from a better-insulated roof to a quieter home. The panels are manufactured, installed, and come with a ten-year guarantee.

Some people worry that Thermotec roof panels are noisy. Then again, it’s worth considering the long-term benefits of this type of roof. The panels are made from 75mm-thick high-density foam with a rubber core. This helps regulate the temperature inside the conservatory, preventing it from overheating. They also eliminate the need to clean the roof regularly, as Thermotec panels are completely silent.

PVC vs polycarbonate roofing

When deciding on a roofing system, weight is often a determining factor. While polycarbonate is considerably lighter than glass, the difference between the two types of materials is not substantial. Tenmm polycarbonate weighs just 4.5kg per square metre, compared with nine.3 kg for glass. In addition to being lighter, polycarbonate is also easier to work with since it requires no structural changes to the roof.

Polycarbonate roofing is also more noisy than PVC roofing due to its inherent characteristic of expansion. As it ages, it expands approximately 0.065 mm per degree Celsius, making it difficult to adhere to a roof without making it rip off. To reduce the noise of expanding polycarbonate roofing sheets, install a barrier between the roof sheet and batten. Another solution is to use self-cutting screws.

Acrylic windows provide better soundproofing

Polycarbonate and acrylic are both great DIY materials, but there are some differences. Acrylic is transparent, while polycarbonate is clear. While polycarbonate is tougher than glass, acrylic tends to break into larger shards. It is also more durable than glass and is often used in building materials for roofs, bus shelters, and convervatories. If you’re wondering if either one is right for your project, read on to find out more.

There are many advantages of acrylic over glass. The lightweight material of acrylic is ideal for window and door installations. It is more expensive than laminated glass but more durable. Acrylic is best for small spaces, while laminated glass is better for large areas. However, if you’re looking for better soundproofing, it’s best to go with acrylic. It’s also easier to clean, allowing you to do more in the long run.