Is My Peloton Making Noise When Pedaling?

If you’re experiencing a peloton making noise when pedaling, there are several possible causes. These can include broken derailleur hangers, loose derailleur links, and worn spokes. If you don’t hear a noise when pedaling, check the three-screw holes at the bottom of your peloton shoes. These should be tight and aligned correctly. If they’re not tight, it may result in a humming sound. To fix the issue, check the shoes at least once a month to ensure they’re tight.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Broken linkages

If you are one of the many users of the Peloton exercise bike, you may be noticing a strange sound when pedaling. If this is happening, you should take a closer look at your Peloton pedals. They are prone to breaking, and it is important to replace them immediately. A broken pedal may lead to injuries, so it’s crucial to know how to fix it.

The noise is typically caused by a stiff link that’s not moving well. It’s easy to fix. To determine if a link is stiff, try pedaling backwards. If the link is stiff, it won’t bend properly to follow the pulleys.

If you notice that a Peloton makes a clicking sound when pedaling, you might be experiencing a broken linkage. This will cause the bike to shake and make noise. You can fix the problem yourself by loosening the part using a hammer. Alternatively, you can contact Peloton customer support to get the problem fixed. If you can’t find a replacement part, you may want to check your warranty to see whether you can still get your money back.

Broken derailleur hanger

A broken derailleur hanger will prevent you from pedaling smoothly. The hanger connects the rear derailleur to the bicycle frame. The hanger is usually made of soft aluminum. It is likely to break before the derailleur. The hanger is relatively cheap and easy to replace. Just be sure to use a T25 or 5mm Allen wrench when replacing it.

The hanger should be angled towards the rear axle. If it is angled or bent, it is out of alignment. This causes poor gear shifting and makes index adjustments difficult or impossible. If the hanger is bent, it is likely to snap. It may also cause your chain to skip or cause drivetrain noise.

A broken derailleur hanger will cause your chain to shift into the wrong spoke. It may be due to a weak hanger or a misaligned “B” screw. Another possibility is a stiff chainlink in the idler cage. In these cases, it may be difficult to make a warranty claim.

Broken flywheel axle

If you hear a clicking sound while pedaling your Peloton, there are several possible causes. One cause is a loose part, or a broken flywheel axle. If this is the case, you can lubricate the crank arm and re-tighten the bolts. Alternatively, you can contact Peloton customer service to have the parts replaced.

One way to replace the flywheel axle is by tapping the flywheel with a hammer. This will loosen the flywheel’s edge and make it easy to remove. A broken paddle post is another common cause. This is difficult to remove with a wrench. You will also need to remove the belt guard and three screws from the wheel.

Another cause is that the flywheel is rubbing against the flywheel. This will make the peloton bike make a clicking noise when pedaling. The flywheel can also become loose due to repeated assembly.

Wearing spokes

A peloton bike that makes a clicking noise when pedaling may be wearing its spokes. While this can be caused by many things, it is often the result of loose spokes. Check the spokes and the quick release lever to ensure they are locked in place. If you cannot find the problem, you should check the hub. The hub is the part of the wheel that the spokes attach to. If the hub is worn, it will cause the clicking noise when pedaling.

When pedaling, you may notice a clicking noise in the front wheel. A broken flywheel could be the cause. It may also be the cause of a rubbing noise while pedaling. Fortunately, Peloton makes replacement parts, and you can either buy them online or at a local bike shop. The constant rubbing between parts causes wear and noise. Using lubricant to prevent rubbing can help alleviate the noise.

Peloton pedals are attached to the pedal axle with three screws, and they must be adjusted to work properly. If they do not, you’ll have to reattach them with the original pedal. Be sure to check them every month to make sure they are tightened properly. Ensure they are not loose since this will create the sound.