How to Start a Car Quietly

If you are one of those people who are always wondering how to start a car quietly, you have come to the right place. This article will show you how to prepare your car to start quietly, how to inspect your engine, how to unlock your car manually so you don’t hear the start-up beep, and even how to repair a bad starter solenoid. By the end of this article, you should have a quiet car and be able to start and run it without a single pesky beep.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Preparing your car for a quiet start

When starting your car, you might want to go as quiet as possible. This can have a profound effect on your relationship with your neighbors, and will help to reduce the risk of you sneaking out of the car unnoticed. Here are a few tips to help you prepare your car for a quiet start. The foam pool noodle cold start trick may also help. Using this technique can make all the difference in your car’s start-up sound.

Inspecting your engine

The first step in quietly starting your car is inspecting the engine compartment. Look for missing or loose bolts and nuts, fans, and caps. If you see anything loose, bring your car to a service center for a professional inspection. Never touch the running engine, and make sure to check all loose parts before you start your car. It will be more difficult to fix a loose part if it is still running.

READ ALSO :   Does Your Car Make a Ticking Noise When You Change the Oil?

Unlocking the car manually to prevent people from hearing the beep

If you have a Honda Accord, you know that you have to use the key fob to start your car to stop the beep. You can also unlock the door manually by pushing the key fob into the ignition switch five times in a ten-second period. These methods are both easy and safe. They help you avoid the embarrassing beep that many people hear on the way to work.

Repairing a bad starter solenoid

One way to fix a bad starter solenoid is to change it. You can simply replace it yourself with the help of a screwdriver. Make sure the wires you use are clean. The positive terminal of the starter should be connected to the positive terminal of the solenoid. This will bypass the relay switch and send 12 volts directly to the solenoid. When your car starts, the solenoid will release a burst of power and make it possible to start the car.

Using a hammer

When you can’t get your car to start, using a hammer to start it is a great temporary solution. The key should be in the “start” position, so that someone can hold it. If the key won’t turn, tapping on the rear of the starter will knock it back into place and get the car started. Sadly, this method is not permanent and requires some work.

Changing the oil level

The noise coming from your engine is likely caused by a low level of oil in the engine. Low oil pressure can make your engine make a ticking, tapping, or hissing noise. Oil level issues can be fixed by adding new oil. BlueDevil Oil Stop Leak is one such product that will repair small oil leaks. Changing the oil level in your engine will ensure your car runs smoothly and quietly.