How to Quiet Velcro

If you have ever wondered how to quiet Velcro, you are not alone. This article will show you how to use a lighter to shorten the hooks and a velcro silencer. You can also mask the noise with fabric. Listed below are a few ways to reduce the noise of Velcro. Read on to learn more! Read this article to find out how to quiet Velcro! Listed below are some of the methods I used to make my Velcro less noisy.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Shortening the hooks

To make velcro quieter, cut the hooks on one side of the swivel tabs shorter. This tactic is safer than using a lighter and does not harm the Velcro itself. First, open the Velcro to expose the loop and hook sides. Then, carefully cut off the excess hooks. Make sure to protect the loop side from the sharp blade while cutting the hooks.

Another technique for making velcro quieter is to shorten the hooks with a lighter. Hold the lighter at an inch’s distance from the hooks. Once the hooks are shortened, slide the lighter across the strip, and it should come apart. Be careful not to burn yourself, as it can damage the hooks. Once the hooks are shortened, they are much easier to open and close. To clean the velcro, you can use an old toothbrush to remove any debris.

Using a lighter

Using a lighter to quiet velco is an easy way to minimize the noise of an opening in a zipper. If you’re constantly opening and closing velcro, a lighter can be used to permanently shorten the hook side, making it less noisy. The lighter should be held an inch away from the hook side. Once you’ve opened the velcro to expose the hook and loop sides, you can cut the hooks.

You can also use a lighter to shorten the hook side of a velcro strip, so that it no longer rips when disengaged. Make sure to use caution, however, as you don’t want to burn yourself or burn the velcro hooks. Once the hooks are shortened, they will be easier to open and close. Additionally, shortened hooks are easier to clean. Using an old toothbrush can remove dirt and other particles from the Velcro.

Using a velcro silencer

You may have heard of Silent Spot, which is a velcro silencer for your pet tag. But did you know that you can also use Silent Spot for your Nike+ iPod transmitter? You can even use Silent Spot for your shoe laces! All you need to do is velcro the arms of Quiet Spot to your shoe laces, and voila! Silent Spot is a perfect solution to loud Velcro.

If you have a Velcro strip that is causing noise, you can try using a lighter to shorten the hook side. This method is quite effective, but it requires you to take the time to read the instructions carefully. If you have an older model of Velcro, you can try using a lighter to shorten the hook side of the strip. This is the easiest way to achieve quiet openings.

Using fabric to mask the sound

Fabric is an excellent way to mask the noise of velcro fasteners. These strips feature tiny loops and hooks that temporarily bind two fabrics. When separated, they make a ripping noise. Velcro is used for many purposes, including shoes and children’s clothes. NASA even uses velcro fasteners in astronaut suits to anchor spacecraft. The good news is that you can use velcro to make noise-absorbing material!

The first step to using fabric to mask the sound of velcro is to cut pieces of the fabric. Make sure the fabric will not stick to the Velcro. Glue is a good alternative to sewing, because it reduces the surface area of the Velcro. This will make the disengagement quieter. Once you’ve cut the fabric pieces, you’ll need to sew them to the Velcro.


Using VELCRO Brand VELStretch to quiet velcro is a great way to eliminate the ripping noise associated with traditional VELCRO closures. These loops are 3/4 inch wide and incredibly flexible, allowing them to expand while still providing a secure fit. They’re also lightweight, weighing just 5.05 grams. For many applications, this product is a must-have.

First, you must cut a piece of fabric to cover each individual loop. Make sure the fabric doesn’t stick to the Velcro itself. Then, sew or glue it to the Velcro. If sewing isn’t an option, glue is a great alternative. Glue will reduce the sticky surface of the velcro, making it quieter to open and close.