How to Quiet LS Lifters

If you’re looking for ways to quiet your ls lifters, you have come to the right place. Here you’ll learn how to clean faulty lifters, fix bent push rods, and even change your oil. You can also try adding an oil additive or flushing agent to your engine’s oil. Whatever you do, don’t forget to use heavy oils! The lifters will stay quiet with this solution.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Fixing a bent push rod

If you notice your car’s engine is running rough, you’re probably wondering whether it’s time to replace your pushrods. You’ve probably heard that you should replace them every 5,000 miles or so. While this is a preventative measure, your pushrods can become damaged or bent, putting excessive stress on other components of the engine. This can lead to much more serious problems down the road.

First, you can inspect your car’s pushrods for bentness. To do this, roll the pushrods across a flat surface to see if they’re bent. If they’re bent, you should get a new one. Make sure you follow the directions on the packaging. It’s easy enough to replace the pushrods, and new ones can be found for less than $20 online.

Using heavy oils

You might think that using thicker oils will make your LS lifters quieter, but this is only a band-aid solution. In order for your engine to run smoothly, the oil must be the correct type for your engine. If you use too thick of oil, it will not pass through the tiny holes on the side of the lifter, causing friction. Rather, you should use synthetic-based oil.

READ ALSO :   Will a Bent Valve Make Noise?

Generally, the thicker the oil, the quieter the LS lifter is. Regular oil tends to thicken as it is used. This is because it makes the oil viscousier. But the thicker oil will reduce friction and keep the oil film intact, preventing debris from being trapped inside. This method does not work for older models because they do not use synthetic oil. You should consult a mechanic for a recommendation on the right type of oil for your particular model.

Cleaning a faulty ls lifter

One of the most important steps in cleaning a faulty LS lifter is to remove the oil. This will also remove the fine particles from the spring. To clean the lifter, you can wipe the surface with a lint-free cloth. Dip the lifter parts in kerosene and allow it to soak for a few minutes. Once the parts have dried, inspect them for defects. Deep scratches and dirt may indicate that they need to be replaced.

Changing the oil in your engine

When changing the oil in your engine, you should pay attention to the viscosity of the oil. This is a measure of how thick an oil is and should be thick enough to pass through the tiny holes on the lifter. If it’s too thick, the lifters will tick, which will make them noisy. The correct viscosity will minimize these noises. Changing the oil in your engine regularly is an important part of maintaining your engine.

If your engine ticks when you rev it, you’ll want to change the oil in your engine to prevent this noise. Make sure to drain the old oil and flush the engine thoroughly before adding the new oil. It’s best to use synthetic oil for this purpose, but if that’s not available, synthetic blends are an excellent option. In either case, you’ll need to change the oil every few years, so a full synthetic oil change is recommended.