How to Make Car Doors Close More Quietly

If you’re looking for a way to make your car’s door close more quietly, you may want to invest in a product designed to eliminate the noise. There are several options available, from MAGZO Foam Seal to Damplifier Pro sound deadening mats. Below I’ll briefly touch on the pros and cons of each option. After reading this article, you’ll be well on your way to making your car doors close quietly.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

Noico Foam Seal Tape

Sound deadening materials make your car’s door close quietly. Noico’s foam seal tape is made of butyl and is light weight, weighing only 0.7 pounds per square foot. This makes it effective at soundproofing and insulating, without sacrificing your car’s horsepower. The cost of sound deadening materials is a common cost cutting initiative among car companies. If you’re wondering how to make your car door close quietly, then this DIY project may be the solution for you.

It works by ensuring that the rubber strip that seals the door is flat. If you have a thick car door, you can use Noico’s foam seal tape to make it sag inward. It’s easy to apply – you simply peel off the backing and press the tape over the opening in your door. The tape will stick to the door cards, making them completely mate with the groove of the window seal rubber strip.

MAGZO Foam Seal

If you want to make your car door close quietly, you should consider installing a MAGZO foam seal on it. These seals are made of EPDM, a highly resilient material. The material is waterproof and non-degumming, and is a superior alternative to rubber tape. Because of their unique grid adhesive back, the seals can be easily applied and are suitable for most materials.

To install the foam seal, you should remove the interior trim panel from the door. There are 10 retaining clips, which must be carefully released. After removing the trim panel, disconnect the door latch and lock cables from the wiring harness connectors. Once removed, set the trim panel aside in a secure location. Next, apply EPT foam sealer to the PLATE-SENSOR, and then reinstall it to the door frame.

Damplifier Pro sound deadening mats

If you want to close your car’s door more quietly, you might want to try out the Damplifier Pro sound deadening pad. This product is highly effective for dampening the sound of a car door, and it’s easy to install – you just need to remove the original car mats and apply the dampening material. If you have a difficult time fitting the mat to your car, you can consider using the Dynamat, which you can purchase in different sizes.

Damplifier Pro sound deadening pads are made with 100% butyl rubber, instead of cheap fillers such as asphalt. They stick to any metal surface, including the floor, door, roof, and firewall. The thick butyl rubber and foil constraint layer also help eliminate airborne noise from engine, tire, and exhaust systems. The damping pads also prevent odor from escaping the car.

Mega Zorbe HMF

For quieter car interiors, consider installing a sound deadening car door. These are specially designed to control vibrations and absorb sound from your car’s doors. Because no two cars are alike, sound deadening car doors can help you drive comfortably and quietly. Listed below are three ways to improve the sound deadening of your car doors. The first method is to use a thick sound deadening material.

Trim-Lok D-Shaped Rubber Seal

One way to make car doors close quietly is to install a Trim-Lok D-Shaped-Rubber Seal. This seal is a special, hollow rubber material that easily fits into the gaps between two pieces of metal. The self-adhesive backing also makes it easy to stick it to doors. A butyl product is another option. They work as a door seal and thick pad. The difference is that they can fit into a small gap and provide an airtight seal.

The Trim-Lok D-Shaped rubber seal is designed to fit 1/8-inch edges and 3/8-inch diameters. These seals are available in a variety of thicknesses and are made of durable, foam rubber. They can be installed on many types of vehicles and are available in two and three-piece styles. The D-Shaped seal is used in many types of applications and is available in many sizes to fit various car windows.