How to Fix Noise When Accelerating in Your Volkswagen Jetta

A common problem with Volkswagen Jettas is a noise when accelerating. This noise can be caused by a faulty wheel bearing, serpentine belt or unevenly worn tire tread. If you have this problem, you need to fix it as soon as possible. Read on to learn how to fix this annoying noise in your Volkswagen Jetta.

OnlySilent featured on media
Disclosure : Some of the links below are affiliate links, meaning at no additional cost, I will earn a commission if you click through and make a purchase. As an Amazon Associate, I earn from qualifying purchases.

humming noise

If your VW Jetta is making a humming noise while accelerating, you might want to find out what’s causing it. If the noise is coming from the floor of the car, it could mean your transmission is not functioning properly. The best thing to do is take your car to a mechanic to get it checked out.

Another possible cause for the high-pitched whine is the serpentine belt. This belt takes the motion of the engine and turns all the accessories. If this belt is worn out, it will begin to slip and produce the noise. You can easily fix the problem by replacing the belt.

faulty wheel bearing

When your Volkswagen Jetta starts to make noise while accelerating, it could be a sign of a faulty wheel bearing. A faulty wheel bearing can cause uneven tire wear and stress on other parts of the vehicle. In addition to causing noise when accelerating, the noise can also occur when the vehicle is turning. The noise may be worse on the front wheels.

If your VW Jetta makes noise when accelerating due to a faulty wheel bearing, it’s important to replace the wheel bearings in the same axle. This will extend the life of your bearings and save you time and money.

READ ALSO :   Why Are Glasses Cases So Loud?

serpentine belt

If you’ve noticed your VW jetta making a noise while accelerating, the problem most likely stems from the serpentine belt. Typically, the problem is caused by a worn or faulty belt tensioner or a misaligned pulley. However, it is possible to fix the noise by swapping the tensioner and pulley.

The noise can be very pronounced and can also happen when the car is cold. It’s a sign that the belt is wearing out. Fortunately, the problem is very easy to identify: open the bonnet and listen to the belt. Check the belt’s condition by repeating the process.

When the belt becomes loose, it causes the noise to increase in volume. It is also louder when you make a U-Turn or accelerate quickly. The noise may also be aggravated when the engine is overheated or if the weather is rainy or humid.

unevenly worn tire tread

If you notice that your Vw Jetta makes a humming noise when accelerating, this may be a sign of uneven tire tread wear. Uneven tire wear is caused by many different factors, including uneven wheel alignment, underinflated tires, and a bad suspension. You can easily fix this problem by checking the tires. If you find the cause of the humming noise, you can then determine what to do about the problem.

The most common cause of the noise is an unevenly worn tire tread. If you notice that your tires are unevenly worn, you should change them right away. If the problem persists, you should visit a workshop for a proper diagnosis. You should also check the balance of the tires. The tires should be in perfect balance for proper braking. In some cases, the tires may need to be rotated, which will fix the problem.

READ ALSO :   Why Are Ship Horns So Loud?

corroded ground wire to radio

The noise you’re hearing is most likely coming from the radio. It could be caused by a corroded ground wire. Luckily, there are easy ways to check for this problem yourself. First, you should check the transmission fluid. Check its color. If it is dark, it’s time to change the transmission fluid.

Another common source of this noise is the alternator. It will make a high-pitched whine when starting. If the whining is accompanied by a light on the dashboard, the problem is likely the alternator. The power steering pump can also cause whining. If you’re filling the fluid to the factory level, this could be another cause.